Steel wire rope 6x36 FC
6x36 is a flexible general engineering wire rope readily available in galvanised, unglavanised and marine grade stainless steel. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the 6x19 construction range. The construction has been designed to give a flexible rope with a good fatigue life. A 6x36 wire rope is available with either FC (fibre core) or IWRC (independent wire rope core) and is used for a wide range of applications, examples of which are shown below:
• Wire rope slings
• General engineering applications
• Crane ropes
• Hoist rope
• Winch ropes
• Holding and closing ropes for grab cranes
• Tow ropes
• Luffing ropes
• Pursing wires
• Mooring ropes
• Lifeboat falls
• Wire rope rigging applications
Nominal diameter (mm) | Approximate weight (kg/m) | Nimimum breaking load -1700 Mpa (kN) |
8 | 0.235 | 37.40 |
9 | 0.297 | 47.30 |
10 | 0.367 | 58.40 |
11 | 0.444 | 70.70 |
12 | 0.528 | 84.10 |
13 | 0.616 | 98.70 |
14 | 0.725 | 114.50 |
15 | 0.814 | 131.40 |
16 | 0.925 | 149.50 |
18 | 1.180 | 189.00 |
19 | 1.320 | 211.00 |
20 | 1.480 | 234.00 |
22 | 1.760 | 283.00 |
24 | 2.110 | 336.00 |
26 | 2.470 | 395.00 |
28 | 2.810 | 458.00 |
30 | 3.240 | 526.00 |
32 | 3.680 | 598.00 |
34 | 4.170 | 675.00 |
36 | 4.640 | 757.00 |
38 | 5.190 | 843.00 |
40 | 5.790 | 935.00 |
42 | 6.410 | 1030.00 |
44 | 7.030 | 1131.00 |
46 | 7.760 | 1236.00 |
48 | 8.380 | 1346.00 |